Search Engine Site Map Contact Us
About Xypex Xypex Products Secifications Applications Projects
CSI Format
Schematic Drawings
  Schematic Drawings

   Retaining Wall

Retaining Wall

1 Between pours, apply Xypex Concentrate slurry to joint surfaces at the rate of 2.0 lb./sq. yd. (1.0 kg/m2).
2 In sealing strip, apply one slurry coat of Xypex Concentrate at the rate of 1.5 lb./sq. yd. (0.8 kg/m2) then fill slot to surface with Xypex Concentrate in Dry-Pac form.
3 Apply one coat of Xypex Concentrate to wall face and over sealing strip at the rate of 1.5 lb./sq. yd. (0.8 kg/m2).

Schematic diagram shows Xypex application only and does not depict the standard requirements for waterstops or expansion joint sealant.

The specifier can consider the alternative use of Xypex Dry Shake or Xypex Admix, where applicable.

Refer to Standard Specifications for further information.



About Xypex  |  Xypex Products  |  Specifications  |  Application  |  Projects

Home  |  Search Engine  |  Site Map  |  Contact Us


© 1999, Xypex Chemical Corporation. All rights reserved.